Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Richmond
Most furnace repairs in Richmond run between $150 and $700, and a live person answers our phone 24 hours a day to schedule your visit. We’re Cold Harbour Heating and Air Houston, and our Furnace Repair technicians know Richmond’s homes well enough to spot what a builder-grade install or shifting gumbo clay has left behind. If your furnace won’t start in Aliana or short-cycles in Pecan Grove, call (832) 371-9862 and we’ll give you a written price before any work begins.
Why Cold Harbour Heating and Air Houston Is Richmond’s Preferred Furnace Repair Company
Richmond homeowners call us because we answer the phone. Not an answering service, not a voicemail tree. A real person picks up, every hour of every day. That matters when your furnace quits at 6:30 a.m. on the first cold morning of the year and the house won’t get above 58°F.
Victor Mancini leads our team, and the technicians who show up in Richmond are background-checked and uniformed. They arrive in a window we actually keep, and they hand you a written price before a single tool comes out of the truck. That’s the Kingswell Way: say the price before the work, show up in the window given, leave the place cleaner than found, put the guarantee in writing, and come back if it fails.
We founded in 2003 as part of the Kingswell network of independently owned HVAC businesses, all working to the same written standards. Richmond customers get the same guarantee every time: a written 365-Day Done Right Promise. If the repair fails inside a year, we return and correct the work at no charge. No argument, no fine print.
Styles & brands we work with
Gas Furnace Repair in Richmond
Gas Furnace Repair in Richmond means working on everything from 1980s standing-pilot units in Pecan Grove to high-efficiency, condensing furnaces in Harvest Green. A no-heat call is usually one of five things: a failed ignitor, a dirty flame sensor, a tripped limit switch, a failing gas valve, or a cracked flue pipe from foundation movement. We start every call by checking what a Richmond home actually does to a furnace, not just swapping the part the code reader points at.
Most gas furnace repairs in Richmond run $150 to $700, parts and labor included. An ignitor replacement typically lands between $150 and $280. A gas valve repair runs higher, often $280 to $450. A heat exchanger replacement on an older unit can push toward $700, and at that point we’ll give you an honest comparison against replacement so you can decide with real numbers.
Ignitor and Flame Sensor Failures
The silicon nitride ignitor in newer furnaces gets brittle after a few years of Richmond’s humidity swings. When it cracks, the furnace clicks but never lights. A flame sensor coated in dust or oxidation does the opposite: it lights and then shuts down in three seconds because the board thinks no flame is present. Both are fast fixes when caught early.
Limit Switch Lockouts and Airflow Problems
Builder-grade furnaces in Aliana and Harvest Green frequently run undersized ducts. The furnace fires, the heat can’t move, the limit switch trips, and the system locks out. That isn’t a faulty switch. That’s a static pressure problem the original install never addressed. We test static pressure on every no-heat call so we’re fixing the cause, not clearing the symptom.
Furnace Tune Up in Richmond
Furnace Tune Up in Richmond costs $80 to $200 and takes about an hour. We clean the burners, check the flame sensor, test the ignitor, verify the gas pressure, inspect the heat exchanger for cracks or corrosion, and measure temperature rise. You get a written report of what we found and what we recommend. Our technicians aren’t paid on what they sell, so the report tells you what the furnace needs, not what commissions need.
Richmond’s humidity makes annual tune-ups more than routine. Moisture sits on heat exchanger seams and burner assemblies for months. A unit that runs fine all winter can still be corroding from the inside. A tune-up catches that before a rollout switch trips on the first cold snap or before carbon monoxide becomes a concern. We inspect the flue as part of every tune-up because gumbo clay movement is a known issue across Fort Bend County.
Heat Exchanger Inspection
We check for the signs Richmond’s climate creates: hairline cracks at the seams, rust trails, flame flicker when the blower kicks on. A cracked heat exchanger isn’t a condemned furnace automatically, but we’ll tell you straight what’s safe and what should be replaced. Safety isn’t a sales tactic. It’s the reason we write the finding down and hand it to you.
Gas Pressure and Burner Setup
High humidity changes gas valve performance over time. We set pressure to manufacturer spec, check the burners are burning blue and not yellow, and calibrate the gas valve for stable low-fire operation on two-stage and modulating furnaces. Richmond’s newer homes in Aliana and Harvest Green have a lot of two-stage units, and a chattering gas valve on low fire is one of the most common tune-up findings we see.
Trusted Brands We Service in Richmond
Our technicians service Carrier, Trane, Lennox, and Goodman furnaces daily across Richmond, and we stock common repair parts for all four brands on our trucks. That means fewer “we’ll order it and come back next week” calls when your Goodman in Aliana needs a gas valve or your Trane in Pecan Grove needs a blower motor. If the part is standard, it’s usually on the truck when we arrive. If it’s not, we’ll tell you before we leave and schedule the return with you, not at you.
Common Furnace Repair Problems We See in Richmond Homes
- Cracked flue pipes from gumbo clay slab movement. Richmond’s clay soil expands and contracts with the Brazos River’s seasonal moisture. Foundations flex enough to separate rigid flue joints in 1990s homes, venting combustion gases into attics and tripping rollout switches. We re-support the flue and reseal the joint before it becomes a carbon monoxide problem.
- Static pressure spikes from undersized builder ducts. Harvest Green and Aliana furnaces often run duct systems that were never checked with a static pressure test. The limit switch trips on cold snaps and the house goes cold right when Richmond finally gets real winter weather.
- Corroded heat exchanger seams from high-humidity winters. Richmond’s winter air holds moisture that settles on warm metal. First-generation Carrier and Rheem units in Pecan Grove and older sections of Richmond show seam corrosion that starts as intermittent flame flicker before it becomes full CO leakage.
- Failed blower motors in homes under ten years old. Builder-grade ECM blowers in newer Richmond homes are disposable parts. They run hot, run loud, and fail early. When a blower dies in a 7-year-old furnace, we check static pressure first because the real culprit is often the duct system, not the motor itself.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Richmond, TX
Furnace repair in Richmond falls into clear ranges. Simple part replacements like ignitors, flame sensors, and pressure switches run $150 to $300. Gas valve repair, blower motor replacement, and control board work run $300 to $550. Heat exchanger problems and flue repairs run $450 to $700, and that’s where we’ll sit down and compare repair against replacement honestly. Every quote is written down before work starts, and it doesn’t change at the door.
| Service | Typical Richmond Price Range |
|---|---|
| Gas Furnace Repair | $150 – $700 |
| Furnace Tune Up | $80 – $200 |
Call (832) 371-9862 for a free estimate. We’ll give you a real number, not a range that widens once we’re standing in your living room.
We Also Serve Cities Near Richmond
We run furnace repair calls throughout Fort Bend County and the surrounding area. If you’re in Missouri City, Manvel, or Tomball, we cover you with the same written guarantee and same-day scheduling. Our Furnace Repair in Richmond team regularly works the neighborhoods from Aliana to Harvest Green, and we extend the same service to Houston’s west and southwest suburbs.
Serving Richmond, TX - Our Local Coverage Area
We’re based in the Richmond area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Richmond
Short-cycling on the first real cold snap is almost always a limit switch tripping from restricted airflow, not a bad switch itself. In Richmond, the usual cause is undersized builder-grade ductwork in newer homes plus a filter that hasn’t been changed since fall. The furnace fires, heat builds up faster than the ducts can move it, the limit switch opens to protect the heat exchanger, and the system locks out. We test static pressure on these calls, and if it’s high, we fix the airflow, not the switch. Call (832) 371-9862 and we’ll diagnose it properly.
Yes. Richmond sits on Fort Bend County gumbo clay, and it swells and shrinks with the Brazos River’s seasonal moisture swings. Foundations in Pecan Grove homes built in the 1980s and 1990s move enough to separate rigid metal flue joints, especially in attic runs. We’ve pulled flues that had separated a quarter inch at a joint, venting combustion gas into the attic until the rollout switch shut the furnace down. This is a Richmond-specific problem, and every furnace repair call we run here includes a flue inspection for exactly that reason.
Rust on a heat exchanger in a 1990s Richmond furnace is common, but it’s not something to ignore. Richmond’s humid winters put moisture onto the metal every time the furnace cycles, and after 20-plus years the seams oxidize. What starts as surface rust turns into hairline cracks that flicker the flame when the blower kicks in. If our inspection finds cracks, we’ll show you the evidence and tell you straight whether it’s repairable or whether you’re better off putting the repair money toward a new furnace. Call (832) 371-9862 and we’ll check it.
A condensing furnace in Aliana will freeze its own drain line if the attic isn’t insulated the way it should be, or if the condensation drain is pitched wrong. Water backs up, trips a safety, and pools on the attic decking. We see this in Richmond attics often because the attic heat in summer hides poor insulation, and winter is when the condensate line actually runs cold. The fix is usually refitting the drain line and checking the trap, not replacing the furnace. Call (832) 371-9862 and we’ll trace the leak.
Seven years is early for a blower motor in a properly installed furnace, and in Richmond it’s usually a sign of a builder-grade install. When the original builder never ran a static pressure test, the blower runs against ductwork it wasn’t sized for, runs hotter, and dies early. We replace the motor, but we also test static pressure so the new one isn’t doing the same work. Otherwise you’ll be replacing it again in another seven years. Call (832) 371-9862 and ask us to check the airflow while we’re there.
Contact Us for Furnace Repair in Richmond, TX
If your furnace is down or running rough, call (832) 371-9862 now. A live person answers, day or night. We’ll schedule a Richmond visit that fits your day, give you a written price before we start, and every repair is covered by our 365-Day Done Right Promise in writing. Victor Mancini and the Cold Harbour team know what Richmond’s gumbo clay and humidity do to furnaces, and we fix the cause, not just the part.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air Houston, serving Richmond since our founding in 2003.