Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateLennox HVAC in Pasadena, TX | Cold Harbour Heating and Air Houston
We provide independent Lennox HVAC service across Pasadena, TX, and what separates our Lennox work from a generic repair call is simple: we know what refinery-corridor air does to these specific machines. If your Lennox condenser is losing efficiency or your furnace won’t stay lit, call (832) 371-9862 and we’ll diagnose it properly. Victor Mancini and our technicians have been working on Lennox equipment in this city long enough to know which failures show up here more than anywhere else.
We’re not a factory-authorized dealer. We’re an independent shop, which means we fix what Lennox builds using the repair that makes financial sense for your home, not a script handed down from a corporate office. If you need Lennox sales & service, we handle repairs, maintenance, and full system replacements across Pasadena service area. The price is written down before we touch a tool, and every repair carries our 365-Day Done Right Promise in writing.
Why Pasadena Residents Choose Us for Lennox Service
Lennox builds solid equipment, but like any brand, it has failure patterns that only become obvious when you work on enough units in one place. Our routes cross Pasadena’s oldest and newest Lennox installs every week, from the 1990s G26 gas furnaces still chugging along in brick ranches near the Boulevard to the newer Elite Series systems going into renovated homes, which is why our Furnace Repair in Pasadena covers every era of equipment. That daily exposure means our technicians recognize a failing inducer motor or a corroded Merit Series coil before they spend an hour chasing the wrong part.
Victor grew up in Los Angeles and learned the trade at Los Angeles Trade-Technical College before spending the better part of two decades working across Greater Houston. He’s run service calls everywhere from quiet Sugar Land subdivisions to the older slab-foundation homes near Memorial Park, and he still enjoys the diagnostic work itself, figuring out why a system short-cycles before a homeowner has to ask. His rule on Lennox equipment is simple: don’t recommend a part unless he can show you why it needs replacing.
We answer the phone with a live person, 24 hours a day. If your Lennox quits during a Pasadena heat wave, our AC Repair in Pasadena means you won’t leave a voicemail and hope for a callback. A uniformed, background-checked technician shows up in the window we promised, diagnoses the issue, and hands you a written price before any repair begins.
Styles & brands we work with
Common Lennox HVAC Problems We Solve in Pasadena
- Corroded aluminum evaporator coils on Merit Series heat pumps. Pasadena’s salt-laced humidity eats pinholes into these coils within 6 to 10 years, causing slow refrigerant loss that most homeowners notice as a gradual loss of cooling. We pressure-test the coil and typically replace it with a genuine Lennox OEM part, because aftermarket coils often don’t fit the drain pan properly.
- Inducer motor failure on mid-efficiency G26 and G61 furnaces. These 1990s-era furnaces use 2-pole shaded-pole motors that seize after 25-plus years, tripping the pressure switch and leaving you without heat during a cold snap. We replace them with OEM or approved aftermarket motors and re-verify the pressure switch operation before we leave.
- Failed run capacitors on 13ACX and 14ACX condensers. When the first heat wave hits, undersized capacitors swell, leak, and quit. We swap in higher-temp-rated capacitors that hold up better against Pasadena’s summer load.
- Faulty two-stage gas valves on Elite EL296V furnaces. The modulating control boards in these units can misread flame signal after years of attic heat exposure, causing intermittent ignition lockouts. Tell me what the system is doing, and we’ll tell you exactly what it needs. Often it’s the board, not the valve.
- Brittle condenser fins on older Lennox condensers. Along the Pasadena Boulevard corridor, we regularly find condenser coils where the fins have turned brittle from prolonged exposure to refinery emissions. Careless cleaning snaps them. We clean gently and apply corrosion-inhibiting spray where it’ll help.
Lennox Service in Pasadena: What Local Conditions Mean for Your Equipment
Here’s a specific pattern we see in Pasadena that we rarely see even 10 miles north: the city’s water supply is fluoridated and moderately hard, which means Lennox evaporator coils here accumulate a brittle calcium scale over time. When that scale combines with sulfur compounds carried in from refinery emissions, it turns slightly acidic and accelerates aluminum pitting. The result is pinpoint leaks that don’t show up on a quick visual inspection and won’t trip a low-pressure switch until the charge is critically low. A Lennox coil that might last 15 years in a drier, cleaner-air suburb can fail in 8 to 10 years in Pasadena. If your system is losing cooling slowly but the condenser runs fine, this is one of the first things we check.
We address it two ways: first, we clean coils carefully to remove scale without damaging aluminum fins already weakened by airborne compounds, and second, we apply coil protection treatments where the corrosion is active but not yet leaking. It’s a Pasadena-specific approach to a Pasadena-specific problem.
Lennox Models & Products We Service in Pasadena
We work on the full Lennox lineup: Merit Series condensers and furnaces (13ACX, 14ACX, ML180, ML196), Elite Series equipment (EL16XC1, EL18XCV, EL296V), Dave Lennox Signature Collection units (XC21, XC25, SLP98V), and the legacy G26, G61, and G71 gas furnaces still common in Pasadena’s 1960s and 70s tract homes. For coils, gas valves, and control boards, we use genuine Lennox parts because aftermarket substitutions often mismatch pinouts or fail early under Pasadena’s humidity. For motors and capacitors, we keep quality aftermarket equivalents on the truck so we’re not waiting on a distributor when your AC is down in August.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Pasadena
Here’s what Lennox work typically runs in the Pasadena market. These are honest ranges, not teaser prices.
| Service | Typical Range |
|---|---|
| Lennox AC Repair (diagnostic + common part) | $150 – $650 |
| Lennox Furnace Repair (ignitor/gas valve/inducer) | $150 – $700 |
| Lennox AC Installation (Merit or Elite, basic to mid-tier) | $3500 – $7500 |
| Lennox Tune-Up (inspection + coil cleaning + capacitor check) | $80 – $200 |
The final number depends on what’s actually wrong, which is why we give you a written price before any work starts. It doesn’t change at the door. If your Lennox is 15-plus years old and needs both a coil and a compressor, we’ll show you the repair cost against the price of a new Merit or Elite replacement, honestly. Call (832) 371-9862 for a free estimate.
Serving Pasadena, TX - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Lennox HVAC in Pasadena
Pasadena’s water supply is harder and more fluoridated than much of Houston’s, so evaporator coils build calcium scale that turns slightly acidic when it reacts with sulfur compounds from refinery emissions, accelerating aluminum pitting. We see pinholed coils in Pasadena 8 to 10 years in, where the same coil might last 12 to 15 years elsewhere. If you’re losing cooling slowly, call (832) 371-9862 and we’ll pressure-test the coil before condemning anything.
Yes, for most of the common failure points. Inducer motors, pressure switches, ignitors, and control boards for the G26 are still available through Lennox distribution or as approved aftermarket equivalents. The parts that get scarce are things like original two-piece heat exchanger panels, but those rarely fail independently. If you have a G26 that’s acting up, we’ll tell you what’s worth replacing and whether the repair makes sense on a unit that age.
Nighttime freezing usually points to low refrigerant from a slow coil leak or restricted airflow from a dirty filter or undersized ductwork, both common in Pasadena’s older homes. The Merit Series aluminum coils are especially vulnerable to the pinholing we described above. A frozen coil left running can slug the compressor and turn a $300 repair into a $3,500 replacement. Call (832) 371-9862 and we’ll check the charge and airflow before you run it again.
Usually yes. The EL296V is a current-model, high-efficiency furnace, and a gas valve issue is often misdiagnosed as a board problem or vice versa. Once we pinpoint it, replacing the valve or the control board typically runs $150 – $700, which is far less than replacing a furnace that still has 10-plus years of useful life. If the heat exchanger itself is cracked, that’s a different conversation and we’ll show you the numbers plainly.
Refinery emissions deposit sulfur compounds and particulates on condenser fins, especially along the Pasadena Boulevard corridor. Over years, those deposits make aluminum fins brittle and can etch the coil surface. We clean coils gently and apply corrosion-inhibiting treatment where the fins are degrading but still functional. A typical condenser in this corridor may lose a few years off its expected life without that maintenance, so an annual tune-up matters more here than in cleaner-air suburbs. Estimates are free, call (832) 371-9862.
Service Areas Near Pasadena
We serve Pasadena and the surrounding communities, including Houston, League City, Missouri City, Channelview, and La Porte. If you’re nearby and need Lennox service in League City or Lennox service in Houston, the same written pricing and 365-day guarantee applies.
Book Your Lennox Service in Pasadena Today
If your Lennox system is struggling, don’t wait for a full failure. Call (832) 371-9862 for a free estimate and a real person will answer, day or night. We’ll put the price in writing before any work begins, and every repair we make is guaranteed for 365 days.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air Houston, serving Pasadena since 2003.